Tel: +86-592-8996369
Categories

Add: 5FL Chuang Ye Building, Chuang Ye Park, Torch High Tech Industrial Zone, Xiamen, China
Post Code: 361009
Tel: +86-592-8996369
Fax: +86-592-8952068
Mob: +8613779950997
Contacts: Mr. Yang
Email: orythcom@hotmail.com


Bathroom Hands Free Blow Dryer Electric With Power On/off And Air Temperature Control Button

Bathroom Hands free blow dryer electric with power on/off and air temperature control button TH-1568

Detailed description

Bathroom Hands free blow dryer electric with power on/off and air temperature  control button TH-1568


1. Automatic bathroom hand dryers electric  

2. Heater and power switch button

3. Infrared sensing technology

4. Antibacteria material


High efficiency hand dryer, economical operation and easy maintenance.

Fast drying hand in 10 seconds means less energy required and cost saving

Hygiene, no touch operation


Packing and delivery of bathroom hand dryers electric


Packing: Brown carton, 4pcs/ctn,

Carton size: 540x480x630(mm)

Pcs per 20GP: 576

Pcs per 40HQ: 1216

Delivery: 15days after receive payment.


Specification of bathroom hand dryers electric


Material: ABS Plastic

Voltage: AC220V/50HZ or AC110V/60HZ

Motor type: Brush motor

Operation: Touch free infrared activation

Drying time: 8~12 seconds

Material: Antibacterial treatment ABS

Dimension: 250*165*470mm Weight: 5.2kgs

Rated Power: 1300W


The single Cold Air Hand Dryers/warm air hand dryer is classical model. Antibacterial material, high efficiency hand dryer, economical operation with easy maintenance. 


Fast drying hand in 10 seconds means less energy required and cost saving.

The hand dryer is touch means hygiene. with switch can be change Cold Air Hand Dryer or warm air hand dryer 


IF hand dryer does not turn on

Answer:


Check is the power supply is connected and grounded properly; ensure correct voltage.

Hand Dryer maybe installed too close to a sink or other reflective surface. Turn off the power for about 10-15 seconds, then turn it back on.

Clean the sensor or replace it if necessary.

The control board connecting line maybe loose check, and replace if necessary.

The motor maybe damaged-check and replace the motor if necessary.


IF hand dryer has heat but no air blowing out

Answer:


The motor maybe damaged, check and replace the motor if necessary.

The control board connecting line may be loosen, check and replace if necessary.


IF hand dryer has only cold air blowing out

Answer:


Check for loose connections to heating element,

Heating element may be damaged, check and replace if necessary.

The control board connecting line may be loosen, check and replace if necessary.


IF hand dryer turns on by itself

Answer:


Hand Dryer maybe installed too close to a sink or other reflective surface.

Hand Dryer might be installed in direct sunlight which may trifler the sensor.

Check for the control circuit board wiring not to be loose or damaged. Replace if necessary.

Clean the sensor, replace if necessary.


IF HAND DRYER CONTINUOUSLY WORKS AND WON’T STOP

Answer:


Hand Dryer maybe installed too close to a sink or other reflective. Turn off the power for about 10-15 seconds, then turn it back on. Clean the sensor, replace if necessary.


IF HAND DRYER HAS LOSS OF AIR SPEED

Answer:


Check the filter, clean it if necessary. Refer to the Maintenance Section for instructions.

The motor may be damaged, check and replace the motor if necessary.

Check for a burning smell, if so replace the motor.


6362698999314793811056048.jpg


d45c10e8-9f91-4435-8832-389f112707e2.jpg

Related Products
Feedback